Gravity GLTST01 Laptop Stand w/Adjustable Hold

No matter if you're working on stage, at home, in the studio or on location at a photo shoot, now your laptop can stay firmly fixed in place and stable at all times in your mobile performance rigs -positioned just the way you want - all thanks to the Gravity® LTST 01 laptop stand.

The large mounting plate can accommodate all standard laptop sizes ranging from 12" to 17". Your laptop is carefully and securely attached to the stand thanks to 14 slots in the top section, 2 slots in the bottom section, and the freely adjustable holding pins and clamps that come supplied with the product. The holding pins are pressed onto the laptop and then locked into place from below using the set screws.

You can also use the stand for your DJ controller, mixer or other pieces of equipment that you always need within arm's reach. The mounting plate can be tilted continuously by 180°, meaning it can be used both in vertical and horizontal applications. It can also be easily twisted off for use in the field.

Its solid aluminium tripod with a 35 mm socket has been designed for maximum mobility because it weights only 1.94 kilograms. The stand's height can be gradually adjusted from 750 mm to 1.320 mm, allowing you to adjust it perfectly to your needs - whether you're standing or sitting.

With the LTST 01 laptop stand, Gravity® offers you a flexible companion for your mobile performance rigs.

Compact and lightweight laptop stand
Tray with adjustable holding pins
Suitable for laptops, tablets, smaller mixers and effects
Tray can be tilted by 180 degrees
Product type
Stands and Tripods Multimedia Equipment
Type
Laptop Stand
Support material
Steel
Tube material
Aluminium
Tubing surface
Powder-coated
Color
Black
Width adjusting jaws
40 mm
Width spacing between adjusting pins min.
120 mm
Width spacing between adjusting pins max.
425 mm
Height spacing between adjusting pins to adjusting jaws min.
117 mm
Height spacing between adjusting pins to adjusting jaws max
250 mm
Width spacing between adjusting jaws min.
130 mm
Width spacing between adjusting jaws max.
360 mm
Support width
480 mm
Tray height
330 mm
Min. height
750 mm
Max. height
1320 mm
Transport length
665 mm
Height adjustment
Set screw with safety split pin
Base type
Leg joint
Base material
Die-cast aluminium
Tubing diameter
35 mm
Max load
35 kg
Interchangeable rings
2 x 30 mm
Black ring pack included
Yes
Weight
4 kg