Audient RM1 Reference Microphone

The RM1™ Reference Microphone is the measurement microphone for Audient’s RoomTune™ Monitor Correction. Each mic is individually calibrated, so every measurement RoomTune™ takes is accurate.

Requires: An Audient iDMK3 interface ( iD1, iD2, iD2+ and iD4+)

Key Features

● Individually calibrated, with a unique RM1™ frequency response profile for accurate measurement every time
● MEMS capsule for consistent measurements over time
● Required for RoomTune™ Monitor Correction on every iDMK3 interface
● Automated setup that dials in gain, levels and phantom power, with no controls to set
● Accurate monitoring, so mixes translate from the studio to every other system

Why choose the RM1™?
Studio microphones are designed to add character. That's what you want when recording, but it throws off a monitor correction measurement. The RM1™ is built to hear your room exactly as it is, and RoomTune™ requires it to set up monitor correction. Keep it in your locker, and you can re-measure any time you move your monitors or change your room.

RoomTune™ is free software included with every iDMK3 interface. Every room changes what you hear, so a mix that sounds right at your desk can fall apart everywhere else. RoomTune™ corrects your monitors on your iDMK3 interface, so you hear your mix as it really is.

Audient designs the iDMK3 interface, the software and the microphone together, so RoomTune™ can configure the whole measurement itself and check for errors as it goes.

Setup, handled - You place the mic. RoomTune™ does the rest.
During RoomTune™ setup, enter your RM1™ serial number to load its RM1™ frequency response profile. RoomTune™ then dials in phantom power, mic gain, monitor level and latency compensation automatically, with no controls for you to set. Easy.

Specifications: MEMS capsule · Omnidirectional · 20Hz to 20kHz · 70.5dB SNR · 0.1% THD · 130dB SPL maximum · XLR · Requires 48V phantom power · 56g