EarthQuaker Devices 'Easy Listening' Analog Amp Simulator / Headphone Amp

With its finely tuned preamp circuitry and sweet analog cabinet simulation, Easy Listening delivers a big, lush sound with zero latency and no harsh digital artifacts. Think of it as the perfect marriage of vintage tone and modern convenience, offering all the high headroom and low noise of an actual tube amp but small enough to fit in your pocket. No menu diving, no IR loading, and nothing else getting in-between you and your tone.

Internally, it's meticulously voiced to capture the soul of one of our favorite classic American guitar amps—a '65 Deluxe—with all the harmonic complexity guitar players crave. Its all-analog circuitry provides a more immediate feel with rich low-end resonance, slightly scooped mids, and that crystalline top end chime that makes electric guitars sing.

Dimensions

3.625 x 1.875 x 1.5 in. (92 × 48 × 38 mm)

Current Draw

75 mA

Input Impedance

1 MΩ

Output Impedance

39 Ω

Input

Mono TS ¼"

Output

Stereo TRS ¼" (Tip is the left channel, Ring is the right channel)

For use with headphones

Requires headphones with a ¼" TRS plug.

For use with a DAW

You can use either a mono TS cable into one channel of your interface or a stereo TRS cable with a splitter into two channels.

Power

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!